Flytec 6040 * Bedienungsanleitung PDF herunterladen (Seite 18)

Operation Manual FLYTEC 6040 GPS 16

1.9 First steps

1.9.1 Before first balloon flight

Seite

- Entry of pilot’s name, type and number of aircraft 15

- Selection of recording interval

400

- Settings of acoustics 21

- Check accu and charge. If due to lack of time charging is not possible, they

are to be replaced by batteries ! 44

- Enter Waypoints 28

- Determine Routes

- Enter flight obstacles such as CTR’s of the flight area

- Regroup the user selectable fields of the 3 pages according to one’s own

personal needs. 9

1.9.2 At start site

- Switch-on the instrument on time to ensure correct GPS reception.

We recommend approx. 10 min.

- Set altitude A1 to altitude of start site. If the altitude is known this value

should be set directly (highest accuracy).

- If you want to adopt the GPS altitude (F2 key), please consider that the GPS-receiver

only indicates the reliable altitude value after approx. 2 minutes!

In case of poor Satellite constellation or bad reception, altitude deviation

of up to 100 m will occur ! 18

1.9.3 Handling during the balloon flight

Flight recording is automatically activated after the start.

Just enjoy the flight and watch not to commit an air space violation.

The instrument shows all important data on the large display screen at any time

or by audible message via loudspeaker.

- Flying time, Speed over Ground, Wind Strenght. 33, 34

The most important commands during flight are:

- Page key for shifting between both Main- and Map pages.

- Right arrow key for shifting to user- data field page.

- Audio keys to switch-on and switch-off the audible information such as Sink alarm

Altitude Alarm

Completion of the flight is detected automatically after landing,

or flight recording

can be cancelled at anytime by long pressure on the ON/OFF key. 40

Do not forget to switch-off the instrument

1.9.4 Data analysis after the balloon flight

Switch-on the instrument and connect to the PC with the Mini USB cable.

For data transfer the instrument needs to be switched to the Main Setup Menu

(long pressure on Menu key). Activate flight analysis program Flychart. 51

(For possible other programs see chapter data exchange). Select the correct

interface or have it done by search command and then download the flight from the

instrument. Several programs allow for direct entry to the OLC or similar online Flychart

competitions.

Download the flights regularly from the instrument to the PC and format the flight memory

from time to time with Del. All Records in Menu „Manage Memory“.

This way you are ensured to record successfully your flights at any time. 12

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 56 57

Kommentare zu diesen Handbüchern

Keine Kommentare

Flytec 6040 * Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Flytec 6040 *